Why this Blog?
The purpose of creation of this new blog was to add all my work that will solely related to my DIY Solar and wind electricity generation system. I will also add here the adventure of my DIY micro-hydro turbine (PAT) unit that has been planned to be implemented in the beautiful Kalam valley. In the recent past i unintentionally got attraction toward the green energy and studied a lot about.
My last visit to Karachi home was the turning point to divert all my intentions and resources toward getting into hybrid solar+wind electricity system. The 12 hours shedding at Karachi was really a mental shock to me. The 2Hours alternate load shedding scheme was so pathetic that for three nights i had only 6 hours of sleep in total. The Starting/Stopping the generator (located at the third floor) was a real muscular exercise especially the last part of the night.
The ready made solution requires a handsome amount of money. Here i will post my DIY approach to get the job done considering the advantage of being low cost, worth of experience and as per my requirement and quality. I intend to work on both Solar and wind turbine simultaneously so that to give the relief to my family.
Lets see will i have success in this endeavor?
This comment has been removed by the author.
ReplyDeleteThanks for sharing this great post.It is very good & in pictures it's looks too good.
ReplyDeleteFluid Strainer
I'd be trampled if all sites gave articles like these awesome articles. Walter Melon
ReplyDeleteI'd be trampled if all sites gave articles like these awesome articles. Walter Melon
ReplyDeleteWhat is the difference, if all energy sources presented at the chart, use same measurement units? And that falling curve in the present would not change it's direction, nor it's angle towards the axis. Gareen Technology Blog Even if we turn to cost of electricity as a method of comparison, I doubt it we would see much of a change.
ReplyDeleteEven I was on the lookout for the same issue and just landed on this classic post. this has made a room in my heart. 2020 Solar PV
ReplyDeleteAmazing article and so different than other cause of much important information.
ReplyDeleteAxiomGB
why are roller coasters so dangerous?
ReplyDeletedumb pain video
First of all, glad to join the Engineering community here.
ReplyDeleteI have found that the best way to get started in Engineering Jobs in the oil and gas industry is to begin by having a look at an oil & gas specific job board and seeing which roles are available. In my opinion, it's important to use a job board as you maximize the number of jobs in one place, and avoid missing any great opportunities...saves you time endlessly scanning the internet for the best jobs! The oil & gas job board at the moment with the most jobs listed is Oil and Gas Best Jobs Senior Principal Pressure Equipment Engineer so it may be worth giving that a try as a starting point. Once you have a good idea of the type of jobs which are available for your skills, tailor your resume to emphasize the points which would be relevant. Then simply start sending your resume off for the jobs you like the look of (you just need to register/upload your CV once and you can apply for as many jobs as you like).
I hope this helps!
Charlotte
hen when you are done, save the new embroidery design out, with just a new file name, and there you are with a new embroidery design that you created all by yourself, with even just that free program! Not the same as some digitizing program made to use different stitch types and filled objects with those at all though, (that costs a way lot more money than free) but way good enough for small monograms, an outline quilt design, or actually anything, no matter what it looked like in the end, if you did not mind punching in that new design stitch, by stitch, by stitch by stitch! logo digitizing
ReplyDeleteWater Hack Burns 2 lb of Fat OVERNIGHT
ReplyDeleteWell over 160k women and men are losing weight with a easy and secret "liquids hack" to lose 1-2 lbs each night as they sleep.
It is painless and it works on anybody.
This is how you can do it yourself:
1) Get a glass and fill it with water half the way
2) Proceed to use this awesome HACK
you'll become 1-2 lbs thinner in the morning!
I'm here to share my testimony of what a good trusted loan company did for me. My name is Nikita Tanya, from Russian and I’m a lovely mother of 3 kids I lost my funds on trying to get a loan it was so hard for me and my children, I went online to seek for a loan assistance all hope was lost until one faithful day when I met this friend of mine who recently secured a loan from Le_Meridian Funding Service She introduced me to this honest loan company who helped me get a loan in within 5 working days, I will forever be grateful to Mr Benjamin, for helping me get back on feet again. You can contact Mr Benjamin via email: lfdsloans@outlook.com lfdsloans@lemeridianfds.com, they do not know I’m doing this for them, but i just have to do it because a lot of people are out there who are in need of a loan assistance please come to this company and be saved.WhatsApp:(+1 989-394-3740)
ReplyDeleteI am really impressed with your blog article, such great & useful knowledge you mentioned here.Your post is very informative. I have read all your posts and all are very informative. Thanks for sharing and keep it up like this.
ReplyDeleteSolar Panels Installation in Islamabad